|
|
Parkway Products processes an extremely wide variety of materials - from commodity injection molded plastics, to cast and injection molded
elastomers, to high performance prepreg and sheet composites. The following is a partial list of these
materials.
|
Commodity Plastics
|
Polyethylene
Acrylic
Styrenic TPE
|
Polypropylene
Polyester
|
ABS
Olefinic TPE
|
|
|
Engineering Plastics
|
Acetal
Polyphenylene Sulfide (PPS)
|
Polyethersulfone (PES)
Polycarbonate
|
Polyurethane
Nylon
|
|
|
High Performance Plastics
|
Polyamide-imide (Torlon®)
Polyimide (Aurum®)
|
Liquid Crystal Polymer
Polyetherimide (Ultem®)
|
Polyphthalamide (Amodel®)
PEEK®
|
|
|
Elastomeric Materials
|
|
Polyurethane
EPR, EPT
Butyl
|
Neoprene
Nitrile
Natural Rubber
|
EPDM
SBR
Acrylic Rubber
|
|
|
High Temperature Elastomers
|
|
Silicone
|
Fluorosilicone
|
Fluoroelastomer (Viton®)
|
|
|
Pre-impregnated Materials
|
Phenolic, up to 60% Glass reinforced
Epoxy, up to 55% Carbon Fiber reinforced or 66% Glass Fiber reinforced
Polyester, up to 66% Glass reinforced
Polyester, Epoxy, and BMI Bulk and Sheet Molding Compounds
|
|
|
Resin Transfer Molding
|
|
Polyester, Epoxy reinforced with Glass, Carbon, and/or Kevlar® Fibers
|
|
|
|
White Papers
peek
phenolic
torlon
urethane
ultem/polyether-imide
|
