Parkway-Thixomolding Engineering Data - Material Data Sheet
Home Company Technology Part Design Engineering Capabilities FAQ Contact Us


Material Data Sheet  .  Comparison  .  Tolerances


MAGNESIUM TXM
MATERIAL DATA SHEET
MATERIAL
  Magnesium     Magnesium    Magnesium 
ALLOY
   AZ91D    AM50A    AM60B 
MECHANICAL
                 
Tensile Strength - Ultimate
KSI (M Pa) 36 243   29 200   32 220
Tensile Strength - Yield
KSI (M Pa) 23 160   16 110   19 130
Tensile Modulus
MSI (G Pa) 6.5 45   6.5 45   6.5 45
Elongation
% 6 6   10 10   4 4
Poissons Ratio
  0.35 0.35   0.35 0.35   0.35 0.35
Impact Strength
ft-lb ( J ) 3.5 4.8   7 9.5   4.5 6.1
Specific Modulus
in 9.94E+07     1.02E+08     1.00E+08  
 
PHYSICAL
                 
Specific Gravity
g/cc 1.81     1.78     1.79  
Density
lb/in3 0.065     0.064     0.065  
Specific Volume
in3/lb 15.29     15.63     15.38  
Hardness
Rockwell R 75     74     74  
 
THERMAL
                 
Thermal Conductivity
Btu/ft-hr-F (W/m-K) 41.8 72   36 62   36 62
Specific Heat
Btu/lb-F (kJ/kg-K) 0.25 1.05   0.25 1.05   0.25 1.05
Coeff. Of Thermal Expansion
min/in-F (mm/m-K) 13.8 25   14.4 26   14.2 25.6
Deflection Temperature @ 66 PSI
F (C) >700 >370   >700 >370   >700 >370
Deflection Temperature @ 264 PSI
F (C) >700 >370   >700 >370   >700 >370
Deflection Temperature @ 6000 PSI
F (C) >356 >180   >356 >180   >356 >180
Melting Temperature
F (C) 1105 595   1150 620   1140 615
 
ELECTRICAL
                 
Electrical Conductivity
% IACS 12     14     17  
Electrical Resistivity
mOhm-in 43     36     31  
Shielding Effectiveness @ 0.020"
dB >85     >85     >85  
Shielding Effectiveness @ 0.050"
dB >88     >88     >88  
Shielding Effectiveness @ 0.100"
dB >90     >90     >90  
 
CORROSION
                 
Mil 117B Salt Spray Corrosion
Mils Per Year 2.8     4.7     4  
 
FLAME CHARACTERISTICS
                 
Ignition Temperature at STP
F (C) 900+ 500+   900+ 500+   900+ 500+
UL94 Flame Exposure Results
  DNB DNB   DNB DNB   DNB DNB
 
  * DNB = Does not ignite / Does not burn          

Values shown are typical values that have been obtained using test bars and are not intended for specification purposes. Inasmuch as Parkway Products has no control over the use that others may put material, it does not guarantee the same results as those described herein will be obtained. Each user of the material should make his own test to determine the material's suitability for his own particular use.
Home   .  Technology  .  Part Design  .  Engineering Data  .  Capabilities  .  FAQ

O N E   S T E P   N A V I G A T I O N

Copyright © 2003, Parkway Products